Establishing an evaluation method for the aging phenomenon by physical force in fuel debris

Suzuki, Seiya; Arai, Yoichi; Okamura, Nobuo; Watanabe, Masayuki

Journal of Nuclear Science and Technology, 60(7), p.839 - 848, 2023/07

https://doi.org/10.1080/00223131.2022.2159559

The fuel debris, consisting of nuclear fuel materials and reactor structural materials, generated in the accident of Fukushima Daiichi Nuclear Power Plant can become deteriorated like rocks under the changes of environmental temperature. Although the fuel debris have been cooled by water for 10 years, they are affected by seasonal and/or day-and-night temperature changes. Therefore, in evaluating the aging behavior of the fuel debris, it is essential to consider the changes in environmental temperature. Assuming that the fuel debris are deteriorated, radioactive substances that have recently undergone micronization could be eluted into the cooling water, and such condition may affect defueling methods. We focused on the effect of repeated changes in environmental temperature on the occurrence of cracks, and an accelerated test using simulated fuel debris was carried out. The length of the crack increases with increasing number of heat cycle; therefore, the fuel debris become brittle by stress caused by thermal expansion and contraction. In conclusion, it was confirmed that the mechanical deterioration of the fuel debris is similar to that of rocks or minerals, and it became possible to predict changes in the length of the crack in the simulated fuel debris and environmental model.

Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal (Contract research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2022-057, 98 Pages, 2023/02

JAEA-Review-2022-057.pdf:8.5MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Quantitative evaluation of long-term state changes of contaminated reinforced concrete considering the actual environments for rational disposal" conducted in FY2021. The present study aims to construct a database for quantitative prediction of contaminated reinforced concrete inside the reactor building. In FY2021, data on deformation and water movement caused by drying and reabsorption of mortar were obtained to evaluate the mesoscale cracking behavior of concrete. A rigidbody spring model was used to develop a program that can consider changes in concrete age and temperature, water, and stress conditions. To evaluate the long-term penetration behavior of radionuclides into the factual matrix, data on sorption …

Investigation of environment induced property change and cracking behavior in fuel debris (Contract research); FY2021 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2022-036, 115 Pages, 2023/01

JAEA-Review-2022-036.pdf:7.15MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2021. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station (1F), Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Investigation of environment induced property change and cracking behavior in fuel debris" conducted in FY2021. The present study aims to investigate the environment induced property change and cracking behavior in fuel debris from the viewpoints of materials science. The research objective is cracking behavior in fuel debris which is presumed to be influenced by environment during long-term fuel debris processing period. The degradation models will be established to simulate the oxidation and hydrogenation processes possibly occurred at fuel debris. The evolution of phase constitution and the corresponding property change in the simulated fuel debris under various environmental conditions …

Investigation of environment induced property change and cracking behavior in fuel debris (Contract research); FY2020 Nuclear Energy Science & Technology and Human Resource Development Project

Collaborative Laboratories for Advanced Decommissioning Science; The University of Tokyo*

JAEA-Review 2021-058, 75 Pages, 2022/02

JAEA-Review-2021-058.pdf:4.82MB

The Collaborative Laboratories for Advanced Decommissioning Science (CLADS), Japan Atomic Energy Agency (JAEA), had been conducting the Nuclear Energy Science & Technology and Human Resource Development Project (hereafter referred to "the Project") in FY2020. The Project aims to contribute to solving problems in the nuclear energy field represented by the decommissioning of the Fukushima Daiichi Nuclear Power Station, Tokyo Electric Power Company Holdings, Inc. (TEPCO). For this purpose, intelligence was collected from all over the world, and basic research and human resource development were promoted by closely integrating/collaborating knowledge and experiences in various fields beyond the barrier of conventional organizations and research fields. The sponsor of the Project was moved from the Ministry of Education, Culture, Sports, Science and Technology to JAEA since the newly adopted proposals in FY2018. On this occasion, JAEA constructed a new research system where JAEA-academia collaboration is reinforced and medium-to-long term research/development and human resource development contributing to the decommissioning are stably and consecutively implemented. Among the adopted proposals in FY2020, this report summarizes the research results of the "Investigation of environment induced property change and cracking behavior in fuel debris" conducted in FY2020. The present study aims to investigate the environment induced property change and cracking behavior in fuel debris from the viewpoints of materials science. The research objective is cracking behavior in fuel debris which is presumed to be influenced by environment during long-term fuel debris processing period. The degradation models will be established to simulate the oxidation and hydrogenation processes possibly occurred at fuel debris.

Modelling concrete degradation by coupled non-linear processes

Oda, Chie; Kawama, Daisuke*; Shimizu, Hiroyuki*; Benbow, S. J.*; Hirano, Fumio; Takayama, Yusuke; Takase, Hiroyasu*; Mihara, Morihiro; Honda, Akira

Journal of Advanced Concrete Technology, 19(10), p.1075 - 1087, 2021/10

https://doi.org/10.3151/jact.19.1075

Concrete in a transuranic (TRU) waste repository is considered a suitable material to ensure safety, provide structural integrity and retard radionuclide migration after the waste containers fail. In the current study, coupling between chemical, mass-transport and mechanical, so-called non-linear processes that control concrete degradation and crack development were investigated by coupled numerical models. Application of such coupled numerical models allows identification of the dominant non-linear processes that will control long-term concrete degradation and crack development in a TRU waste repository.

Tunnel excavation analysis of siliceous mudstone using a damage model

Mishima, Seiki*; Ogata, Sho*; Inui, Toru*; Yasuhara, Hideaki*; Kishida, Kiyoshi*; Aoyagi, Kazuhei

Dai-15-Kai Iwa No Rikigaku Kokunai Shimpojiumu Koen Rombunshu (Internet), p.215 - 220, 2021/01

When the durability of the geological repository of high-level radioactive waste is evaluated, understanding the cracking behavior within the crystalline/sedimentary rocks during excavation of waste disposal cavities is important. In this study, we performed a numerical analysis that expressed the tunnel excavation carried out 350 m underground at the Horonobe Underground Research Center of the Japan Atomic Energy Agency. Simulated results are agreement with actual trends of fracture propagation, and the measured horizontal convergence of the tunnel was reproduced by the numerical analysis relatively well.

Synchrotron radiation X-ray diffraction method

Hayashi, Makoto*; Shobu, Takahisa

Residual Stress, p.100 - 132, 2021/00

Structural materials may undergo fatigue fracture or stress corrosion cracking during use. One of the causes is the residual stress generated by heat treatment and processing in the manufacturing process of structural materials. There are various methods for measuring the residual stress. This book introduces measurement techniques using ultrasonic and magnetic methods, starting with laboratory X-rays, synchrotron radiation X-rays, and neutrons. In addition, we will outline examples of measurement of residual stress due to processing and welding of various materials, measurement examples of actual machines, change behavior of residual stress due to static and repeated loads, and evaluation methods of fatigue remaining life based on the change behavior.

Review and evaluation on the surface area of vitrified products of high-level waste; Surface area increase factors due to fracturing and their bases for the performance assessment of geological disposal

Igarashi, Hiroshi

JAEA-Review 2020-006, 261 Pages, 2020/09

JAEA-Review-2020-006.pdf:4.42MB

A literature review was conducted on the increase in surface area of vitrified products of HLW due to the fracturing caused by cooling during glass pouring process and by mechanical impact, from the perspective of a parameter of the radionuclide release model in the performance assessment of geological disposal system studied overseas. The review was focused on the value of surface area increase factor set as a parameter in the model, the experimental work to evaluate an increase in surface area, and how the parameters on surface area were determined based on the experimental results. The surface area obtained from the experiments executed in Japan was also discussed in comparison with the overseas studies. On the basis of the investigation, the effects of various conditions on the surface area were studied, such as a diameter of vitrified product, cooling condition during and after the glass pouring, impact on vitrified products during their handling, environment after the closure of disposal facility, and others. The causes of fracturing are associated with the phenomena or events in the waste management process such as production, transport, storage, and disposal. The surface area increase factors set in the nuclide release model of the glass and their bases were reviewed. In addition, the measured values and the experimental methods for surface increase factors published so far were compared. Accordingly, the methods for measuring surface area as the bases were identified for these factors set in the models. The causes of fracturing and features of these factors were studied with respect to the relation with the waste management process. The results from the review and assessment can contribute to the expanding the knowledge for the conservative and realistic application of these factors to performance assessment, and to the developing and upgrading of safety case as a consequence.

Fracture-mechanics-based evaluation of failure limit on pre-cracked and hydrided Zircaloy-4 cladding tube under biaxial stress states

Li, F.; Mihara, Takeshi; Udagawa, Yutaka; Amaya, Masaki

Journal of Nuclear Science and Technology, 57(6), p.633 - 645, 2020/06

https://doi.org/10.1080/00223131.2019.1709996

OECD/NEA benchmark on pellet-clad mechanical interaction modelling with fuel performance codes; Impact of number of radial pellet cracks and pellet-clad friction coefficient

Dostl, M.*; Rossiter, G.*; Dethioux, A.*; Zhang, J.*; Amaya, Masaki; Rozzia, D.*; Williamson, R.*; Kozlowski, T.*; Hill, I.*; Martin, J.-F.*

Proceedings of Annual Topical Meeting on Reactor Fuel Performance (TopFuel 2018) (Internet), 10 Pages, 2018/10